TEREX - Donati Impianti di sollevamento




versione italiana   english version   deutch   francais   espanol  


LATEST NEWS

abbonati al nostro feed RSS per restare aggiornato sulle news di Donati

We are pleased to introduce our new logo, symbol of quality, reliability of products and the new business strategies that, with the support of TEREX, are under construction.


Donati Sollevamenti have been rewarded by ANIMA for the development of exports


Starting from August 5th, well move in our new premises in Legnano

 

ELECTRIC CHAIN HOISTS DMK SERIES

The DMK series electric chain hoists can be used in fixed execution (hook or eye) with hand-pushed trolley, electric trolley, trolley in low headroom configuration also in climbing execution. The hight quality of Donati products is guaranteed by a Quality System Certificate UNI EN ISO 9001:2000. The range of DMK electric chain hoists series are produced in :
  
4 basic sizes:
DMK 1-2-3-4 , with capacities from 100 to 4000 kg, in the FEM (ISO) service units - 1Bm (M3), 1Am (M4), 2m (M5).
  
single lifting speed:
made with a 4 pole motor : 4 or 6,3 or 8 or 16 m/min. for Single chain fall hoists; 2,5 or 3,2 or 4 m/min. for Dual chain fall hoists.
  
two lifting speeds : 
made with pole change motors : 4/1,2 or  8/2,5 m/min. for Single chain fall hoists; 2,5/0,8 or 3,2/1 m/min.  for Dual chain fall hoists
 
standard hook runs:
3 mts. (different lifting heights available on request)
 
 
 
 
Electric chain hoist in fixed execution
  
 
  • Sold with eyebolt suspension
  • More than 150 standard executions - 1 or 2 lifting speeds
  • Capacities from 125 up to 4000 kgs.
  • FEM (ISO) : 2M(M5)
  • Standard hook runs 3 mts. (different lengths on request)
  • High-strength steel rod chain 80kg/mm
  • Noise level less than 85 dB (A)
  • Epicyclic crown wheel reduction gear and self-braking electrical motor with conical brake that ensures efficient braking action.
  • Motor protection IP55, insulation class F
  • Supply voltage : 400V- 3 phase - 50 Hz.
  • Low voltage controls 48V
  • Single chain fall (up to 2000 kgs.) with clutch device, dual chain falls (up to 4000 kgs.) with electromechanical overload device and raise/lower limit switches

 
Electric chain hoist with hand-push trolley
 
 
    
 
 
  • Horizontal movement by push/pulling the load
  • Recommended for light duty and short load travel only
  • The push trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti tilt derailment bars and equiped with shock absorbing buffers.
  • Capacities from 125 up to 4000 kgs.
  • FEM (ISO) : 2M(M5)
  • Working at one or two lifting speeds
  • Other characteristics as per DMK in fixed execution

 
 Electric chain hoist with electric trolley
 
 
  • Movement operated by the push button panel fitted on the hoist
  • Recommended when manual load pushing is not feasible and for heavy duty use.
  • The electric trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti tilt derailment bars to prevent drop or derailing, and equipped with shock absorbing buffers.
  • The trolley can be supplied at:
    • 1 speed - m/min. 11 or 22
    • 2 speeds - m/min. 7/22
  • Electric limit switches to limit the horizontal travel of the electric trolley on the beam
  • Suitable for rectilinear monorails; with special devices it can runs on curves (minimum internal radius on the technical catalogue)
  • Capacities from 125 up to 4000 kgs.
  • FEM (ISO) : 2M (M5)
  • Other characteristics as per DMK in fixed execution

 
 Electric chain hoist with electric trolley - low headroom execution
  
 
 
 
  • The best solution to get the maximum hook-run; fitted on a frame with a return system for the chain, the frame is mounted on 2 trolleys.
  • Available in electric or hand-push execution
  • Capacities from 125 up to 4000 kgs.
  • FEM (ISO) : 2M(M5)
  • Lifting and travelling at 1 or 2 speed
  • Other characteristics as per DMK in fixed execution

 
Electric chain hoist - climbing execution
  
 
  • Allows the reaching of the installation point with the hook and the related chain, without having to lift the entire weight of the hoist.
  • It is particularly suited to the entertainment industry  and when frequent installation and dismatling at greater heights are requested.
  • Capacities from 125 up to 2000 kgs.
  • FEM (ISO) : 2M (M5)
  • Lifting speed : mt/min. 4 or 8
  • Chain box in cloth
  • Other characteristics as per DMK in fixed execution

 

 

Donati Europe Donati Sollevamenti S.r.l. - Via Quasimodo, 17 20025 Legnano (MI) ITALY - C.F. e P.IVA IT 00195340120 - Cap.Soc. 2.000.000 i.v. - c.c.i.a.a. Milano: N.1964037 - Cod.Export: MI 368890
Realizzazione sito by SUNET con CMS WebHat