|
 |
LATEST NEWS
Starting from August 5th, we’ll move in our new premises in Legnano
Capacities from 125 Kg. up to 2000 Kg. with trolleys.
Are now downloading the sparte-parts catalogues
|
|
|
| |
ELECTRIC CHAIN HOISTS DLK SERIES
The DLK series electric chain hoists can be used in fixed execution (hook or eye) with hand-pushed trolley, electric trolley. The hight quality of Donati products is guaranteed by a Quality System Certificate UNI EN ISO 9001:2000. The range of DLK electric chain hoists series are produced in :
|
4 basic size: |
DLK 1 - 2 - 3 - 4, with capacities from 125 to 2000 kg, in the FEM (ISO) service units - 2m.
|
|
two lifting speed: |
made with a 4 pole motor : 4/1 or 8/2,5 m/min.
|
|
standard hook runs: |
3 mts. (different lifting heights available on request). |
Electric chain hoist in fixed execution
|
|
- Sold with eyebolt suspension .
- Standard executions with 2 lifting speeds.
- Capacities from 125 up to 2000 kgs.
- FEM (ISO) : 2m.
- Standard hook runs 3 mts. (different lengths on request).
- High-strength steel rod chain 80kg/mm².
- Noise level less than 85 dB (A).
- Reduction gear epicicli and electric motor three-phase asynchronous two-pole.
- Motor with cylindrical rotor.
- Motor protection IP55, insulation class “F”.
- Supply voltage : 400/415 V- 3 phase - 50 Hz.
- Low voltage controls 48V.
- Single chain fall with clutch device.
|
Electric chain hoist with hand-push trolley
|
|
- Horizontal movement by push/pulling the load.
- Recommended for light duty and short load travel only.
- The push trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti tilt derailment bars to prevent drop or derailing, and equipped with shock absorbing buffers.
- Capacities from 125 up to 2.000 kgs.
- Other characteristics as per DLK in fixed execution.
|
Electric chain hoist with electric trolley
|
|
- Movement operated by the push button panel fitted on the hoist.
- Recommended when manual load pushing is not feasible and for heavy duty use.
- The electric trolley is adjustable for variable flange widths, fitted with steel machined wheels, permanently self-lubricated bearings, fitted with anti tilt derailment bars to prevent drop or derailing, and equipped with shock absorbing buffers.
- The trolley can be supplied at:
- 1 speed - m/min. 11 or 22
- 2 speeds - m/min. 7/22
- Electric limit switches to limit the horizontal travel of the electric trolley on the beam can be fitted.
- Suitable for monorails fitted with curves when fitted with reaction rollers (minimum internal radius on the technical catalogue)
- Capacities from 125 up to 2.000 kgs.
- FEM (ISO) : 2M.
- Other characteristics as per DLK in fixed execution.
|
|
  © Donati Sollevamenti S.r.l. - Via Quasimodo, 17 20025 Legnano (MI) ITALY - C.F. e P.IVA IT 00195340120 - Cap.Soc. € 4.000000 i.v. - c.c.i.a.a. Milano: N.1964037 - Cod.Export: MI 368890
|
|
